Bulkhead Cover For Sale

What did you install ? any pics

I'd be interested. Any rips/tears? It looks like some sort of imprint on the passenger side, upper or is that just the light? Is the material loose on the bottom of the bubble or is it torn? e-mail photos to mgreen15 (at) adelphia.net. Thanks.

I installed the kit from Kirk at AmeriSport. Gained a LOT of room on the passenger side. I also went for the removable center section of the new bulkhead, so I only have to remove it and the new dog hatch to get engine access. I modified it a little, since I found the clips supplied hard to release...I cut them off and used velcro strips to secure the center section - it only took a little. I'll post a pic when i can - wish I could post more than one, but the forum won't let me!

Post your pics to a "gallery." Then you can post as many as you like.

Click on 'NEW" but instead of scrolling down just to 'discussion', go to 'PHOTO ALBUM'

Tried the tips, downloaded 7 pics and was told they were all too large (must be 200kb or less). All of the pics were at the lowest quality (density) my camera will take. Any help for an obviously technologically handicapped Pantera owner?

Try emailing the pictures to yourself. It usually prompts if you want smaller pictures or original size. Select the smaller size and use it to post.

If you have any photo software, you can resize (shrink) them and then try uploading them.

good luck,

John

One trick I have used is to scan the picture and then re-save it as a .jpg

Chip

Larss, You can e-mail pics to me direct.

Lars,

I would be interested in the cover as well.

Please e-mail me.

Please contact me at my e-mail address larrym@charter.net I can at least send you additional pics that way. Thanks

Bulkhead cover is SOLD!