Holley 900cfm DI Injection

Guest

Does anybody have experiance with a Holley 900cfm DI injection? I have just mounted one on a Pantera, but i don't know what distributor i have to use to make the ignitionprogram work. I have now an original magnet trigger Ford distributor. The distributor has only 3 wires. Holley recomends 4 wires only. Is there any adapter or another one on the market?
Let me know.

------------------
Roland

2/3/017:44 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Brian (Guest)

I had an ole ProJection 4 . . . which I am updating for a modern 4Di system.

Look on www.holley.com . . . as far as I know they have all of their support products for the Di TBI systems listed.

To use the ignition time you will need a fully electronic ignition system. I haven't installed it myself but an Avenger ingnition system is supposed to work with it.

Brian

3/5/019:15 AM

❤️ 0

Paul Underwood (Guest)

Is this the 'projection' system? I used to have that on a Ranger with a 302. That had a Mallory distributor, but I can't tell you too much about it, other than it never ran too well. I suspect you've got an improved version.

3/5/019:39 AM

❤️ 0

mikep01 (Guest)

if ou have the holley 4di, that teh one you program with a lap top. the distributor you want to use for the program is off a 89 ford f350 with a 460. neverr got that far with mine. went back to a carb. mine wouldnt idle do to the cam. 70 rancher w 351c 4v, 4spd

3/27/018:21 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...