In order to run an M1 ZF behind a SBF what input shaft modifications and/or custom parts (clutch, pilot bearing...) are required?
Thanks.
Original Post
Replies sorted oldest to newest
First of all you need to know what you have,
length,Dia.,pilot,and spline of input shaft.There was 3 or 4 different combos of shafts for the M1 built at the factory,is your plane to use it for DeTomaso?
length,Dia.,pilot,and spline of input shaft.There was 3 or 4 different combos of shafts for the M1 built at the factory,is your plane to use it for DeTomaso?
The application would be ERA GT40 replica.
You still need to measure all the pieces first to see what bellhousing will work.
ERA sell one for /2 ZF to SBF.Please call
me at (714)516-1215 (RBT)and I will get more
in detail. P.S. What is a M1 HEAD ??????
[This message has been edited by Lloyd Butfoy (edited 01-01-2001).]
ERA sell one for /2 ZF to SBF.Please call
me at (714)516-1215 (RBT)and I will get more
in detail. P.S. What is a M1 HEAD ??????
[This message has been edited by Lloyd Butfoy (edited 01-01-2001).]