Oil pump drive for DIS

fastcatFredrik Gustavsson Owner of 6122

I have now finished my custom oil pump drive that I will use when going to distributorless ignition system. The distributor is cut off and the axle is shortened. I made a new upper collar and a cap. I also made a groove for an o-ring to hold the cap in place.

Attachments

Hide

Images (4)

8/19/062:02 PM

❤️ 0

Original Post

Replies sorted oldest to newest

lf-tp2511Member

Fredrik,

Very nicely done. Addition of the o-ring was a good touch I might not even have thought of.

Be sure to post more photos as your project continues.

Larry

8/26/067:36 AM

❤️ 0

design-jediMember

I am going to need one of those!
Were you unable to find somebody that makes one or did you just want it built right?

John
4488

8/27/0611:45 PM

❤️ 0

fastcatFredrik Gustavsson Owner of 6122

quote:
Originally posted by Design-Jedi:
I am going to need one of those!
Were you unable to find somebody that makes one or did you just want it built right?

John
4488

I did not find any for Ford, only for Chevy. So I had no other option than building one myself.

8/28/068:00 AM

❤️ 0

Skip to main content

Attachments

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...