Skip to main content

Pantera Project Car

No Motor but everything else and more.

I purchased this car #3396 in Arizona where it had been kept it’s entire life I believe. It had been fitted with steel group 4 flairs. I had the car shipped to Pantera Performance Center (PPC) and Dennis was very positive about the car. Cory Gehling of Collectors Choice lowered the floor pans. I then had the car soda blasted to remove all paint. Before doing this I talked with Dennis (PPC) and Cory and both recommended not remove the coating under the car as it was very solid. Only the paint and engine bay were blasted. I also removed all of the lead, welded in reinforcements, and then re-leaded the car and painted it in primer. Included is a carbon fiber/fiberglass hood and trunk. Many new items, such as door handles and trim pieces, are included. I have one of the luggage racks that I was going to mount on the steel deck lid as I was not going to use the original tub that I also have. Included is a set of group 5 and Ronal wheels that will go with car. There are 2 ZFs with the car. A polished one gone through by Dennis and a NOS. Also included is Hall's windshield kit installed and new windshield. I installed a 6 point cage with removable sides for easy access to further strengthen the chassis. Dennis has went through all the suspension, uprights and upgraded the brakes. There is no AC unit and radiator as I was planning to have a front mounted radiator and AC combo. There is a full interior with many extra pieces and a set of older Recardo seats. This is probably the most solid base you could start from with lots of parts. This Pantera and most parts are at PPC in Castle Rock Colorado.

Price: $30K

Contact me at weigenant@gmail.com for pictures.
Last edited {1}
Original Post

Replies sorted oldest to newest

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×