I know a bunch of you have these "generic" black anodized spreader bars. The one in the picture below was custom milled with "deTomaso", "Pantera" and "Isis" logos.

I am offering engraving services for your own generic spreader bar.

For the low price of $50 (plus shipping), you can select from the following engraving choices...

deTomaso Pantera => Default Choice if nothing Specified

Pantera deTomaso
Pantera Pantera
deTomaso deTomaso

Up to two Isis Logo(s) is/are optional at no extra charge!

If you are interested, please post up via this website. This is a hobby, and the mill has limited capacity, so I would like to schedule the work for rapid turnaround.

I suggest you only send the two anodized bars that need engraving, well wrapped. If you take them apart (and keep your spreader bolt/nuts), you can get them into a USPS Flat Rate Shipping box.

PM me if you have any questions.

Rocky
(Chuck Huber)

Attachments

Photos (1)
Original Post
We have only worked on the anodized ones to this point. I believe the polished ones are not chromed, so upon completion, they ought to look like the one in this picture.

I have talked with my machinist, and asked if there is a way to flatten out the cut, and polish the inside of the letters, as shown on the PIM picture.

The basic engraving works well because the contrast between the anodized black, and the cut aluminum is pretty apparent.

Scroll Down for Polished Spreader Bar...

I'll get more info for you....

Rocky
We talked about the engraving, and were concerned that the mill wouldn't provide a finely polished surface inside the cut like the PIM version shown here. They make a nice product.

He recommends sticking with the anodized bar, as shown in the first post. We don't want to turn out a low quality product.

Thanks for the inquiry, though!

Rocky

Attachments

Photos (1)
Likes (0)
Post
×
×
×
×