Pertronix Ignitor 111 Distributor

horacecopeMember

Has anybody fitted the actual Pertronix Ignitor 111 distributor and low ohms coil to their Pantera, if so how good is it.

Did a search here and a couple of threads on fitting the Pertronix module to existing points distributors etc but nothing on the actual Pertronix distributor itself. . It seems good value and has the smaller cap so should be no fit issues.

Need a new distributor and don't want to go back to points or the Mallory Unilite that I have had reliability issues with before.

Car is for the road only, no track work at all

Cheers
Horace

11/6/158:46 AM

❤️ 0

Original Post

Replies sorted oldest to newest

goodrocMember

Horace, I fitted the Pertronix III Billet Distributor with Steel Gear (standard) to match my Roller Cam from Lunati. It comes with 3 sets of Springs to trim advancing and 3 sets of stops to limit max advance. The advance limiters appears to be quite primitive but actually works well. Word of advice when changing Springs put a piece of thin Piano Wire around the Spring until it is secured! this way you won't drop it and have to take you Car apart to find it again ;-)

11/6/1512:16 PM

❤️ 0

riverratMember

Anybody else tried these out? I've been looking at these for another engine. I like the concept without the box.

Thanks

4/27/162:18 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...