Skip to main content

Closed1 reply

rear brakes

fordgtfordgtMember
I just finished rebuilding the rear stock brakes on my 74 L. I put new pads on and they don't clear the rotors. The new pads were measured and they are about 7/16ths not counting the backing plate. The ones I took off measure about 1/4. Any hints? thanks.

[This message has been edited by fordgt (edited 02-14-2001).]
Original Post
buttondoorbuttondoorPushbuttonguy</>
quote:
Originally posted by fordgt:
I just finished rebuilding the rear stock brakes on my 74 L. I put new pads on and they don't clear the cailipers. The new pads were measured and they are about 7/16ths not counting the backing plate. The ones I took off measure about 1/4. Any hints? thanks.


I'm not a brake expert, but when I replaced my rear pads with Porterfields last year, I learned the brake pistons on my early 71 are screw-type adjustable. I had to adjust mine slightly to get the pad in on one side. The piston easily screwed in to give more clearance. Good luck.
Views: 103
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×