SPREAD BORE CARB GASKET NEEDED

usmcfredMember

I have a '72 Pre-L with bone stock 351C-4V intake and Motorcraft 4300 Carburetor.

I'm looking to buy a new MOUNTING GASKET with the METAL INSERTS for the later SPREAD BORE 4300 Carb and intake. Can you advise who sells these gaskets? Thanks much.

PLEASE NOTE NEW EMAIL: fred@fhammerle.com

usmcfred

3/2/1711:20 AM

❤️ 0

Original Post

Replies sorted oldest to newest

George PAdmin.

I believe the Fel Pro part number is #60301, although the inserts are plastic, not metal.

#60242 has no inserts, its just a flat gasket.

3/2/174:31 PM

❤️ 0

usmcfredMember

Thank you Jack. Unfortunately, PAW closed their doors around 2011. It was a great performance parts supplier that just couldn't or wouldn't make the transition to selling on the Internet. Gone but not forgotten.

I found the Fel-Pro part number on Amazon so bought one there as I get free shipping as an Amazon Prime member. I hope the plastic inserts are as good as the OEM brass was.

usmcfred

3/2/177:42 PM

❤️ 0

usmcfredMember

Thank you George.

I found the Fel-Pro part number you provided on Amazon so bought one there as I get free shipping as an Amazon Prime member. I hope the plastic inserts are as good as the OEM brass was.

I appreciate the info you provided.

usmcfred

3/2/177:48 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...