Track Boss Cleveland block update Nov. 1st...

tmeyerMember

Fixture for opp#1 is almost finished. Fixtures for opp#2 & 3 are already finished. Tomorrow the last few pieces will be here to officially attached it to the pallet.
I predict we will be making aluminum chips by Thursday or Friday at the latest. Pictures & video will follow, infact we will probably post daily on the progress of this project.
Stay tuned...
For more info, follow this link.
http://www.tmeyerinc.com/product-p/tbp-tb9.2.htm

11/1/163:26 PM

❤️ 0

Original Post

Replies sorted oldest to newest

George PAdmin.

I am from day to day in such anticipation ... its all I can do to keep from drinking.

That's the story I tell Debbie.

In all honesty, I admire Mr. Meyer very much, and send him all of my emotional light and strength each and every day.

Those of you willing to support his efforts shall be appreciated as much as he.

11/3/169:18 PM

❤️ 0

italfordMember

If my current Cleveland ever needs to be bored this will be a good alternative since its already 0.030" overbore.

11/4/169:14 AM

❤️ 0

lf-tp2511Member

quote:
already 0.030" overbore.

In my recent conversations with Dave McClain and Tim Meyers I have learned that if sonic testing shows thick enough piston walls a 40 over build is not automatically a bad thing.

Larry

11/4/1610:44 AM

❤️ 0

comp2Member

Tim built the engine in my car. He's a stand up guy.

Gary

11/4/161:15 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...