Skip to main content

After 25 years and 15,000 miles it was time to change the Pantera clutch master cylinder again.  It was working fine but weeping a small amount of brake fluid from the back piston seal.

I remembered that it was not much fun changing it twenty-five years ago and adding 25 years to my age did not make crawling into the footwell on my back any easier.  But, I got it changed without too much pain and it is working well.

It is a new stock type master purchased from Pantera Performance and Dennis bench tests them before shipping, so you don’t end up going through the installation and then have issues.

Mike

Last edited by pantera1887
Original Post

Replies sorted oldest to newest

If anyone bench tested the clutch master cylinder that I just bought from Pantera Performance Center, then they didn't do a very good job. Mine started leaking as soon as I installed it. I am going to take the one that was in the car and send it to a place in New York that rebuilds these master cylinders and uses quality parts. I have a new CNC clutch master cylinder that I never used because I didn't want to cut the hard line to make it fit and I have never been able to find an adapter.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×