Skip to main content

Replies sorted oldest to newest

Dear Mike,

         Both of mine (late '74s) are slip fit and is held in place with a C-clip.  The slave bracket may have some idiosyncracies due to its handmade nature.  It may have been painted too much  reducing the I.D. for the slave cylinder.  I can't speak to the earlier Panteras.

                     Chuck Engles

...When I changed over to the 'Long Throw' Slave Cylinder, sold at PIM, it was a 'little' loose in the Stock Mount ('74L). I chucked it up in the Lathe and Knurled bands into the Aluminum Body, to increase the Diameter. Fit is good now, and the knurling does Not show.

MJ

Last edited by marlinjack

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×