Skip to main content

I am trying to put my car back together and I cannot find how the gas flap / door is held closed or open.
Is there a spring or block that goes on the top bolt in the picture below?
This is the back of the left side gill.
Pictures or a description of what I am missing will be gratefully appreciated..

Attachments

Images (1)
  • photo_(1)
Original Post

Replies sorted oldest to newest

John, Martin,

Thanks for the great details!

My car is a 71 and it has an aero-style side filler like Martin's but the connection at the tank (part 36) is at 90° (turns horizontal) with a short hose connecting the two. Naturally, gas barely flows into the tank this way and it seemed there was no way to use a bent pipe like the original 71 filler (it curves gently and ends up too high off the tank). I see now that I need to get one of the later-style units and then maybe it will work.

Thanks again guys!

Mark
quote:
it seemed there was no way to use a bent pipe like the original 71 filler (it curves gently and ends up too high off the tank)


Mark,

If you have a curved filler pipe, then that is an aftermarket part. The attached pic is of an original '71 fill. The fuel cap was only about 1" above the top of the fuel tank.

John

Attachments

Images (1)
  • 71_Fuel_Filler
Post
×
×
×
×
Link copied to your clipboard.
×