Skip to main content

Closed2 replies

Header connection

quickittyquickittyMember
I picked up this project with very little history. One of the things that has got me puzzled is this connection from the header collector that goes to the valve cover breather. Does this provide any actual benefit? If so how?
I plan to bore and stroke this one to 408, would I be better off cutting and welding the hole on the exhaust? I plan on powder coating the headers anyhow.
I was told the engine has a solid cam (I'll change that) I started it today for the first time, fired right up and purred like a (loud) kitten (on steroids Smiler )

Attachments

Hide
Images (1)
  • Exhaust_400_LR_IMG_6996
Original Post

Replies sorted oldest to newest

quickittyquickittyMember
quote:
Originally posted by Dave2811:
That is a crankcase evacuation system. It creates a partial vacuum in the volume below the pistons at high RPM to reduce pumping losses and helps ring seal. Works with open headers. Race car stuff only.


Thanks Dave, your explaination makes sense. I will most likely cut it off and weld the hole closed.
Views: 65
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×