Motive Bleeder

popsrcrMember

Anyone use one of the Motive Pressure bleeders? I'm wondering which adapter would fit a stock master?
Any help appreciated.

2/9/066:24 PM

❤️ 0

Original Post

comp2Member

I have been playing with a bleeding tank. I did my entire system which was new (MGB). Worked well. Pump is basically an airbrush pump I believe with the in/out ports swapped. I just hook it to a tank and draw the fluid into the tank.

This is old photo. After doing it this way a while I ended up taping a second hole into the tank to atatch the vacume so the pump can run while I bleed:

I tried a presurization system and blew out the fluid so fast I had to prime the MC again.

Gary

2/9/066:47 PM

❤️ 0

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...