moving the relay box.

I hope you are going to be able to provide some photos.

I was the owner who did the relay box relocation into the footwell.

See this thread, and don't forget to view Page 2, also.

Larry

http://pantera.infopop.cc/eve/...562/m/3401023756/p/1

BTW - I found my old posting by clicking the "FIND" link, selecting "ADVANCED SEARCH" and entering ...footwell relays... for an "all these words" search.

There is little stock about my car. I went completely outside the box and wired things from scratch. I set the main fuse box and relays in the front trunk. I have another fuse/relay panel on the rear firewall near items related. This leaves a lot more room under the dash. I did add a relay setup for the windows under the dash (which I don't have a photo) but without the main electrical harness there was plenty of room.

The dissadvantage to the front trunk harness is it does not look as good as it could. I may make a cover at some point. The advantage is I have easy access to all the wiring and am able to change things around at will.





Here is the relay and fuse panel on rear firewall:



The dash itself is easily removable with 2 bolts, 2 screws, and 3 plugs. One of the plugs is simply power for the gauges and switches:



I know this is probably outside the box of what you are thinking but it may give you a more open mind as to what you can do.

quote:

Originally posted by LF - TP 2511:
I was the owner who did the relay box relocation into the footwell.

See this thread, and don't forget to view Page 2, also.

Larry

http://pantera.infopop.cc/eve/...562/m/3401023756/p/1

BTW - I found my old posting by clicking the "FIND" link, selecting "ADVANCED SEARCH" and entering ...footwell relays... for an "all these words" search.

Thanks very much for the help Larry, I think thats the way I will do it, the pic on page 2 makes it seem a very neat modification, Comp your mod is too advanced for me and I like keeping the car near standard if possible.
JFB I will take some pics too, thanks to all grand result from this forum again.

quote:

Originally posted by JFB #05177:
I hope you are going to be able to provide some photos.

Yes did the job today, pics of
the original layout
plate with new bolts installed
new layout as per Larrys photo
and installed in Footwell.
All kudos to Larry who thought of this grand Mod originally

that is so much neater looking and the access has to be better!