Hey all,
I am in the process of doing my rear wheel bearings, and have realised that I only have the bearing splash shields for one side.
Does anyone know where you can get these nowadays?
Can I run the car without them, or are they essential for spacing?
Replies sorted oldest to newest
That part is obsolete. It was needed before sealed bearings were used for the rear hubs. Now that all bearings for the hub are sealed, it is no longer needed.
Thanks for the reply Steve. That is good news.
I will just double check the spacing when they are all together, because without the shield the rotor would be just that little bit closer to the upright.
