Ordered some STD rod and main bearings from a US parts supplier over here. I asked for Clevite but they said they only had Sealed Power in stock.
That wasn't a problem for me, I'm familiar with the Sealed Power brand and have used their pistons before.
I ordered the bearings but when the rods arrived they were boxed NAPA with the part no 3400CP. I checked with the supplier who tells me the NAPA bearings are Sealed Power, is that correct.
Not heard of NAPA so was checking on the forum if they are in fact Sealed Power as mentioned and if not are the NAPA any good. Not prepared to fit anything sub standard in my engine so will send them back if need be.
Cheers
Original Post