Some time ago I shaved the rubber on the rollers because it had flattened and made it nearly impossible to move a seat. This worked fine with the driver's side seat because you put weight on it. But the slightly smaller rollers will roll randomly when breaking or accelerating because nothing keeps them in place.
If you've fixed or replaced them successfully, I'd love to know what you did.
Replies sorted oldest to newest
replace them..
We made them from Delrin on a lathe…. Not a complicated job for any machine shop…
from the other thread:
OD .950
Width .620
I got the dimensions to machine mine from Brian Graham.
I used 1/2" umhw poly plastic and a Milwaukee big hawg carbide hole saw,1 3/8 od,1" Id. Was simple and cheap,works great, and any one with a drill press can make them.
Are there 8 rollers per seat (4 per track) or 8 rollers for the pair of seats?
2 per track,4 for each seat, 8 total for both seats
Thanks, Lane!
