Skip to main content

Closed1 reply

SWAP A STARTER-SAVE SOME WEIGHT

lf-tp2511lf-tp2511Member
Just thought I would post the weight savings from switching to the high torque starter offered on eBay for $65 - many of us have bought this with no reported problems.

http://tinyurl.com/67em2v

Stock Ford starter = 16 pounds, 12 ounces

Replacement = 7 pounds 14 1/2 ounces

Weight saved = 8 pounds 13 1/2 ounces

Larry
Original Post
lmguylmguyMember
I would never think that there was that much weight saving.

Along the same lines, I changed from stock (cast iron) heads and intake to aluminum , stock 'headers' to aftermarket and starter to hi torque and was surprised at how much the ride height changed from the weight reduction. I wish I would have measured before the swap but I think it changed the rear ride height by 1.5 to 2.0 inches.
Views: 72
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×