Skip to main content

I'm replacing my coil with a new msd blaster coil. When I went to remove the original there was a red/ orange/ baby blue lead connected to the bat connection. The other con was the dist and that had 2 blue wires connected to it. Coming from the same harness were 2 additional black wires that were not connected to anything. The previous owner eliminated the points in the distributor by putting in a little blue electronic box. Could anyone tell me where these two black wires hook up to? Thanks.
Dr. Alex
Original Post
Many of us have noticed there are apparently 'extra' wires running in that area. Haven't a clue what the Factory was thinking, but don't feel bad in untaping them and ash-canning the spares. Some Panteras had an extra high-tension coil lead also... Be sure to also bypass the stock starting resistor or you'll hobble your MSD with low voltage at all times except starting. Good luck.
Post
×
×
×
×
Link copied to your clipboard.
×