Its all about size...pistons, valves...etc

Guest

Im in need of valves, pistons etc, to rebuild my engine, which im boring.

I need 0'30 oversize pistons...and I see at summit (for example) some: Forged Flat, 4.030 in. Bore

Is 4 the standard size and 4'030 what I need?
Same for the main rod, bearing rod..etc which are the standard measures???

Thanks guys!

6/11/088:24 AM

❤️ 0

Original Post

Replies sorted oldest to newest

accobraMember

If I were in your position I would either have the engine builder select the individual compents or by a KIT from one of the companies like Summit, SCAT or EAGLE.

Ron

6/11/087:15 PM

❤️ 0

Bianchito (Guest)

Thanks Ron.
BTW, I sent you about a month a go a couple of enquiries about an engine you were selling and didnt got any feedback: did you got it?

6/17/083:08 AM

❤️ 0

accobraMember

Yea I PM'd you. Its a basically stock 351C 4 bolt main Edelbrock torker intake, its been freshened up ... meaning a stock rebuild, rings, pistons, valves, bearings and gaskets, The cam a little hotter then stock.

Its going to take a lot to ship an engine over seas. You would be better off rebuilding the one you have and Buying a KIT thru Summit or SCAT or EAGLE.

Ron

6/17/084:01 AM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...