PI Motorsports "Heritage" wheels and tires set

I would think you be hard pressed to get 335x35x17's to fit on the rears of any stock Pantera without sticking out.
But I could be wrong.....
These are 345x35x15's.

335/35X17 is a common size for the 17X11 wheels on a stock body car. Look at Mike Dailey's car http://www.panteraplace.com/

Thanks Jim, it's not the first time I've been wrong....

Yes, I'm running all that, On the back 335/35/17 front 225/45/17 They fit, real happy with them,,, Yes look'n bad ass,, some photos.

more

1 more

let me know if you want more photos , I'll go take more shots from the back

..

Thanks! Those pictures are great. I love the way those wheels look.


Thanks again!

Are you going to get some ?

I am not sure yet. I am also looking at the Kodiak wheels that COZ posted about. But, I think I like the look of the Heritage wheels better. I love the Campy look!!

I will decide in the next week or so and make my purchase.

I have a couple more questions, shotgungrooms, could you email me? my address is kats22@cox.net

I would also like to see any additional pics you could take from the back.

Thanks a lot.


kats

Kats,
I just received a set of these from Dave & Jerry & trial fit them on my car last night. They tuck into the rear wheel wells further than the 10" original Campys with 295/50-15 tires I had on there - great fit! I'm going to be very happy with both the fit & quality of these new "shoes" for the Cat & highly recommend them. Dave & Jerry are great guys to work with which is an added benefit. Cerainly deserve the "Bob Seal of Approval"!! BTW, my car is an late '72L & unflaired.

Bob Radefeld #5042

quote:

Originally posted by 1973UFO:
Kats,
I just received a set of these from Dave & Jerry & trial fit them on my car last night. They tuck into the rear wheel wells further than the 10" original Campys with 295/50-15 tires I had on there - great fit! I'm going to be very happy with both the fit & quality of these new "shoes" for the Cat & highly recommend them. Dave & Jerry are great guys to work with which is an added benefit. Cerainly deserve the "Bob Seal of Approval"!! BTW, my car is an late '72L & unflaired.

Bob Radefeld #5042

Any pics?

I like the Campys look to, Kats, Here are some more photos

Ron,
As soon as I get them installed I'll try to post some shots. Only received one box yesterday with the drivers side wheels & tires. Will probably receive the other box early next week & get them on. Hopefully, I can figure out how to post the pixs on this board - never tried it before so may be asking for some help next week from all you guys! BTW, anyone happen to have a recommendation on lugnut torque on aluminum wheels like these?? Thanks!

Bob

photo 2

photo 3

# 4

# 5

# 6

# 7

Those are awesome pics shotgungrooms. Thanks a lot! I think I am going to have to buy me those wheels/tires.


kats

Very nice!

I was wondering about those wheels myself because the ads in pi said they fit on stock car without flares then reading winter 2004 pi on page 44 bottom left hand corner it says wheel wells were extended to accommodate 17 inch wheels. What didn't I understand? Are they the same Heritage wheels?

Hey, shotgun, where did you get the chin spoiler?

coz, could you post a side view photo of your car?........on the gt-5 bodied cars, is there a wheel spacer used? i'm in the process of restoring a gt-5 bodied 74, i have the 13" campys also with the same size tires you are using.,they dont seem to come out far enough,and my car seems to sit higher . are the gt-5 cars lower than stock panteras ? i bought an UNFINISHED project and i'm not sure what should be used to get the proper gt-5 appearance......(shocks ,springs, wheel spacers , etc...........any help is greatly appreciated...............thanx

edmguru, The spoiler was on the car when I got it ? ,, It looks like the one sold by PI , Then painted.