Skip to main content

Hi All, 
This weekend I flushed by brake and clutch lines and installed speed bleeders at the same time.  For those not familiar, speed bleeders have an internal check valve, that when the bleeder is loosened, allows the fluid to flow out but does not permit air or fluid to re-enter.  This makes bleeding a one person job.
 
 
The part numbers I used are as follows for sock calipers and clutch slave:
 
Brakes:
SB8125L M8x1.25  You will need six of these 
 
Clutch Slave:
SB6100 M6x1.0  You will need one of these
 
They come with rubber dirt caps as well.  My stock caps had long been lost.
 
 
Cheers!
 
Dennis Valdez
 
 
Last edited by George P
Original Post

Replies sorted oldest to newest

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×