Selling parts from a 351c engine I purchased used which quickly blew a big end bearing. Also new parts from plans many years ago. Interested in selling complete package, offers.
Used CHI 2V heads, bronze valve guides worn from misaligned rockers, valves could be ok, springs, Procomp roller rockers, ~7,000 miles.
Used Trick Flow longer arm pedestals, cut Mallory guide plates to align valve tips, CompCams 3/8" pushrods, ~100 miles.
Used TFC 2V intake with one inch milled off top
Used Mallory Unilite, non-vacuum with added roll pin
Used Crane gold roller rockers, not sure of ratio but came from Boss 302
Used Romac balancer
Used Kevko 10 quart oil pan with pickup for Pantera etc.
Used Ford Motorsports valve covers
Used 351c block, 4-bolt, needs line-bore, rebore, cam bearings etc, 0.030"
Used 351c block, 4-bolt, oil restrictors, bored at 0.030 I believe with line bore, surface rust,
Used stock crank, 010 / 010, needs grind
Used 8 stock rods & forged pistons
Used Stock flywheel
Used stock water pump and bell housing cover
Used Pantera oil dipstick
New parts,
Weiand 8209 water pump,
TRW L2379F (8) forged pistons (030)
TRW T8325M-30 (8) piston rings (030)
Edelbrock Torker 2760 intake
Mallory Unilite 4756701 vacuum distributor
Original Post