Hi ,I need a heatervalve for my 1980 Longchamp,
It's maybe the same as a Maseratie Kyalami or qeurtroporte 3
Have one of you maybe a new one for sale?
regards
Simon
simonvels@kpnmail.nl
Original Post
Replies sorted oldest to newest
Hi Simon
Do you have a photo of the valve? if you have please email it to me and I will check it out for you.
Joe
Do you have a photo of the valve? if you have please email it to me and I will check it out for you.
Joe
quote:Originally posted by Dtmgt5:
Hi Simon
Do you have a photo of the valve? if you have please email it to me and I will check it out for you.
Joe
Hi Joe, please send me a message , I cannot load here the pic's, Thanks
simonvels@kpnmail.nl
On the end , I have rebuild the old heater valve.
It is a easy job to do , only replace an rubber O ring
Simon
It is a easy job to do , only replace an rubber O ring
Simon
Hmmmm- that sounds like a Pantera heater valve. Of which there are two variants. Too bad about your photo problem.
Hi Simon
My Longchamp heater valve works fine, but is hard to turn. Did you find that taking it apart and together again, it was easier to move?
My Longchamp heater valve works fine, but is hard to turn. Did you find that taking it apart and together again, it was easier to move?
Hi Mikael,
it's easy to taking it apart and togheter again.
Better is doing it now before the cable nods .
or post a pic from your valve to see if it is the same as I have
Simon
it's easy to taking it apart and togheter again.
Better is doing it now before the cable nods .
or post a pic from your valve to see if it is the same as I have
Simon