393 Stroker

ajthreeMember

It is finally here. I went with the orig 4V quenched heads and ford intake then finished it off with a Holly 770. I am having a tough time getting it to mate up to the ZF. Is there some easy way to get the ZF on? I have the engine and ZF level and alligned. I pull the clutch alignment tool out but they don't seem to go. I did try putting the trans in gear and ever so slightly rotating the axles to get the shaft to go through the clutch disk. Maybe I just need to have a beer and try it tomorrow!

Attachments

Hide

Images (1)

10/3/076:56 PM

❤️ 0

Original Post

George PAdmin.

Have 2 beers!

10/3/079:26 PM

❤️ 0

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...