good evening all
spring has sprung, wow what a day in the midwest, lovely in the 70's with tons of sun!!!
after stripping the front trunk and coating it with a couple of coats of por-15, i started to look where i could get some 3M body schutz to finish it off with. this particular product was chosen because the engine compartment was finished with it for the previous owner, so i thought i would be consistent.
the problem is the 3M-body schutz product is applied via a spray applicator which of course costs about $100. call me cheap, but has anyone applied this product other than by the special $100 spray gun that will probably be used for nothing else, or is there an aresol can similar product out there.
thanks in advance
nazgul
Original Post