Hi All,
Ideally I’m looking for one of Kelly C’s 9.2 deck intakes that will suit a Windsor SVO block.
I’ve spoken to Kelly and maybe there’s a chance of piecing together a new one but it’s a long shot so thought I’d see if anyone has one they would sell?
Of if anyone has anything that would suit I’m open to ideas!
Looking forward to hearing from you!
Regards,
Chris
Replies sorted oldest to newest
For a carb or EFI application? I ask as I have a Kinsler 3 piece Ford mechanical injection that I was going to convert to EFI, but no longer heading in that direction.
For Efi.
I could be interested dependant on specs of it and price etc.
Could you send me some details please?
Thanks,
Chris
I would be interested in one for a 9.2 Fontana block, which I believe is a Windsor design. It would be nice if it was a single plane air gap style and set up for port fuel injection.
@jffr posted:I would be interested in one for a 9.2 Fontana block, which I believe is a Windsor design. It would be nice if it was a single plane air gap style and set up for port fuel injection.
Just fyi this is a wanted post is for an 8 stack itb system not a plenum setup 
@jffr posted:I would be interested in one for a 9.2 Fontana block, which I believe is a Windsor design. It would be nice if it was a single plane air gap style and set up for port fuel injection.
The manifold you use depends entirely on the heads you’re using. Before you buy cylinder heads, make sure there’s an intake manifold available for your application.
