I need suggestions for mounting the drier in the front passenger wheel well area. It looks like it can be readily mounted as shown below but I have some concern about the wheel contacting it. Thank you for your input
The photo below is from an old posting here on our forum.
Replies sorted oldest to newest
Is there room for it on the other side of the splash shield? If not, a horizontal drier might be a better way to go.
Yes, there is room on the other side, near where the horn mounts. That's where I mounted it on another Pantera. It's a little harder to access things there and you have to take out the headlight bucket.
Mount it behind the radiator. Should be enough room there specially if you have the radiator layed down.
Remove the switch from the top and put it inline. That will allow you to mount the drier as high as possible . From where you are now, move it out and up . Works great .
Ron
Thanks Ron.
Can the switch still be used elsewhere in the system?
Here is another possible solution that might fit along the wheel well top rail area
@stevebuchanan posted:Thanks Ron.
Can the switch still be used elsewhere in the system?
https://www.summitracing.com/parts/vta-24679-vus
Yes.
