Skip to main content

Having never installed one or taken this off I look at the attachment method and am stumped.

What is the best way to dis-connect and then re-connect the cable at the carb? I'm looking to tighten the cable and I know the end will twist to lengthen and loosen.

Thanks for the help.

Dave

Attachments

Images (1)
  • Hypurr_Accelorator_Cable_-_Carb
Original Post

Replies sorted oldest to newest

Hey thanks Mike.

So forward being towards the firewall?

From your picture it's hard to tell > is there an end to the cable > and does the spring go inbetween the cable housing and the clip?

My Pantera never had the spring and when re-restored the vendor never asked when I got a new cable if I needed one. I have not seen your spring on most Panteras?

What exactly does that do/help?

Thanks again for the info.

Dave

Attachments

Images (1)
  • Hypurr_Accelorator_Cable_-_Carb_REV
The spring clip can slide either way but I find it easier to push it toward the front of the car. The clip has a ridge on it, which you can use as a push point.

I got my cable from Pantera Performance in CO and it looks identical to the original factory cable. There is a telescoping end on it with a spring that goes around the outside. The cable part is thicker than your cable. Notice that I added a second spring as a safety.

Mike
Post
×
×
×
×
Link copied to your clipboard.
×