Air cleaner/screen fabrication

another pic.....

Nice job, looks great.

question, How did you make the circular solid piece around the air cleaner? Does it wrap around the screen or is it just on one side?

What diameter element are you using??
Jeff

Mike,
The top looks very nice. And the logo looks much better straight.
The top looks like it may be too tall to replace the Hall style that just fits under my screen. Can you check the height of the top or can your friend make them shorter ?
Thanks,
Jeff

Dave, Not sure what you mean by "circular solid piece" I have black foam around the filter just to hide the bright white paper. I cut down a Moroso foam kit to make it fit. Then just out from that is black door edge guard to finish off the round hole in the screen.

Jeff, The top is 10 inch dia. That is as big as you can get and still clear the screen back edge.

Jeff 4134, I started with a cheapo Mr Gasket 10 inch filter. Im using that bottom and a off the shelf element. The top itself is 3/8 thick like the old one you mentioned. This new one is modeled off the old 14" one.

quote:

circular solid piece"

Mike I think he was asking about the trim piece you put on the screen.
Jeff

Real nice job, Mike. I was just thinking that I wanted to do this the other day - both for looks and better air intake.

Did you install a 'high rise' intake manifold to get the height?

EA 3528, Im running a Blue Thunder Pantera intake with a 1/4 insulating spacer. There is just no way to get enough air to the carb without going up thru the screen.

Where did you find the 1/4" thick spacer? Is it an open center design or four bores? I have a Blue Thunder with a 1/2" thick four bore phenolic spacer under my Demon thats just a wee bit too tall for me to get my engine screen on. With no spacer the carb linkage interferes with the manifold. A 1/4" would work though.

Some day a set of those CHI heads are going to be on my motor too. Very nice.

larryw,

The spacer is open center, #055515425 from Jegs.

Thanks. I checked them a while ago, I'll take another look.

Anyone interested in a air cleaner top or machine work can PM kramstr. His name is Mark.

Thanks, Mike

Hi All

Im thinking of making some engine screens to sell. Like the one in my pic. Anyone interested ? I have no idea of price yet.

MMMM would you do the persons exsisting screen??
Jeff

Jeff,

What do you have in mind ?

Mike

You modify my screen. I ship to you, then you ship back. How much does your friend want for the filter top?
Jeff

Jeff,

I'm asking $185 for the unpainted lid. $205 for the lid with black wrinkle finish. Plus $10 for shipping.

I'm also working on some air cleaner nuts. I'll post some pics when I have some samples finished.

Mark

Hey MidengineMike
What made you go with the 4V's over the 3V's? Any dyno results?
Will