Skip to main content

5 replies

an Attic find!

jfb05177jfb05177Member
well it isn't really an closed attic, just where we stored things in the roof space. I occasionally have been taking down stuff to clean out my Mother's house. Yesterday I put most of the notes for a BSME in four 13 gallon trash bags. Besides the class notes there some of the wall postings I had over my drafting desk. these were the spec sheets from R&T, unfortunatly, since the roof space is subject to humidity and heat, they turned to dust as I looked through them.

then I noticed a frame, turned it over and here is what I found! It is penciled 51/100. I don't know if I got while in school (74-78) or after when I got the Pantera (81).

Attachments

Hide
Images (1)
  • RT_print
Original Post

Replies sorted oldest to newest

marlinjackmarlinjackThe Machinist #5723 AMARGOSA MACHINE 'Running on Empty- Middle of Nowhere'
...I've said it before, the Proportion of the Engine in these Drawings, is Too Small!
The Crank Pulley would be Into the Cockpit and the Engine would be Taller and Longer. These R&T Drawings have Always Represented the Engine Wrong, approximately 4/5 actual size. Being I'am a Machinist, use to Precise Blueprints, some to Scale; This Might not 'Bother' You but it Bothers Me!

Add Reply

Views: 162
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×