Skip to main content

We put many of our personal cars in our automated parking structure today as we had a film crew shooting (tomorrow as well). We shuffled cars around in and out of the structure as well as into different spaces on different floors. The fully edited video will be uploaded to our website (Autoparkit.com) in a couple of weeks where I can provide a link. The clips' files were too large to upload here, but here are some stills...

Attachments

Images (1)
  • DSCF0692_(640x480)
Original Post

Replies sorted oldest to newest

No. It meets all seismic codes and is designed to withstand significant shaking. And there isn't a single weld anywhere on that upper structure. It is a patented bolt together system that goes up exactly like an erector set. The upper 3 floors' structure was built in 8 hours, start to finish if you can believe it. If you're up in L.A., let me know, and I'll give you a tour. Bring your Pantera, and we'll video it going up and down.
Thanks for your interest.
quote:
Originally posted by tberg:
No. It meets all seismic codes and is designed to withstand significant shaking. And there isn't a single weld anywhere on that upper structure. It is a patented bolt together system that goes up exactly like an erector set. The upper 3 floors' structure was built in 8 hours, start to finish if you can believe it. If you're up in L.A., let me know, and I'll give you a tour. Bring your Pantera, and we'll video it going up and down.
Thanks for your interest.


Most structures that are designed to meet current building codes will experience damage, and that isn't limited to non-structural components. In fact, in the event of a significant earthquake, the building official won't probably let you back in the building until it has been looked over by a competent professional or structural engineer, and if there's damage, it could be "red-tagged" and no entry would be allowed.

There are structures that are designed to withstand anticipated ground motions from earthquakes without damage, but they are usually nuclear-related, bridges, command centers/dispatch areas, etc. However, the actual ground motions will vary.

Your "upper structure" is what a structural engineer calls a moment frame-based structure with bolt-together cast-steel components, but the beams are "dog-bone" reduced beam sections at the ends that are designed to yield and plastically deform, absorbing energy in the process. The beams are actually welded to the cast steel components in the shop and field-bolted together, so it seems as if it's a total bolt-together system. It will deform, move, and may need repair after significant ground shaking.

Pretty cool stuff, though. I do like it- just wanted to put my $.02 in there.
Dear Corey,
Thanks for your comments, and of course, in the case of a very significant earthquake, there is always potential for damage to any structure no matter how strict the seismic building code. The moment frames, in this case, as well as the i-beams are bolted together in a patented process from a northern Cal. company named ConnXtech. They are bolted together with a special collar at the intersection of the i-beams. It is spectacular to watch the installation. It's like watching time lapse photography in real time. The difficult part of the build process, in this case, is the fully automated aspect of the system that will allow a future tenant to simply drive in, get out of the car, go to an apartment and retrieve the vehicle, all with the wave of a tiny fob, and all done in approximately 30 seconds, while maintaining strict safety standards. The programmers have worked for months on getting this right. We are within a couple of weeks of finishing. It will be interesting to gauge potential tenants' reactions to the system when they start looking at the apartments. Updates will keep coming.
quote:
my fingers move faster than my mind

Big Grin

Reminds of my son yesterday, he's 15 and training his English for next year's US summer vacation. He said, that he wanted to be so fluent in English, so that he could speak without thinking about it. I quickly said that if he wanted to learn to speak without thinking first, he should get his mother to teach him. She found it less amusing than he and I did... Big Grin
New photos of my "red" collection in the automated parking structure. Dept. of Water and Power is beginning to hook up our power lines (as opposed to the diesel generator with which we are powering the system now), so that within a week or so we can start testing at full speed. We are running at about 30% speed now. So far, so good.

Attachments

Images (1)
  • DSCF0707_(640x480)
Post
×
×
×
×
Link copied to your clipboard.
×