Any reliable sources for interiors? I know SACC carries seat foam and covers. Looking for carpets, door cards, dash, headliners and other small parts.
Thanks!
Attachments
Images (1)
Original Post
Replies sorted oldest to newest
I recently purchased a carpet kit from Larry Stock at Pantera parts connection in Carson City.
I chose the gray color which is an off black. It tends to lighten the interior just a little bit and is in better harmony with my silver paint
very pleased with the quality of this carpet, especially when compared to a previous set that I purchased from another vendor.
Larry
Attachments
Larry, what’s that eyebolt in the center under the passenger seat?
Chuck
Thanks Larry.
Chuck,
submarine belt anchor, that is too tall and contacted the bottom of the Recarro seats.
Will need to change to a flat bolt-on bracket mounting style. However, not sure how often it will actually be put into use.
Larry
I recently purchased seat foam from SACC, my Upholstrey guy gave the quality high praise. Something to keep in mind is I was used to about 1 1/2 inches of foam in the seat after 50 years of wear. The new seat foam is about 4 inches thick. After my guy stripped the old covers and foam and did some welding work on the backs, he installed the new foam and called me to take the seats home and test fit them. I’m glad he suggested it because my head was touching the headliner. Adjustments were made and the fit is just right. I hope this info is helpful.
Joea,
Thanks, very helpful.
Mike
@joea posted:I recently purchased seat foam from SACC, my Upholstrey guy gave the quality high praise. Something to keep in mind is I was used to about 1 1/2 inches of foam in the seat after 50 years of wear. The new seat foam is about 4 inches thick. After my guy stripped the old covers and foam and did some welding work on the backs, he installed the new foam and called me to take the seats home and test fit them. I’m glad he suggested it because my head was touching the headliner. Adjustments were made and the fit is just right. I hope this info is helpful.
I found the same thing, but only discovered it AFTER reinstalling the seats. One of these days, should I run out of other projects, I'll take the seats back to the upholstery shop and have them shave 3/4"-1" of foam out of the bottom seat buns.
Thanks, I will keep that in mind.
Mike