Skip to main content

Closed1 reply

blue thunder intake

H hotstuffMember
I'm having my engine rebuilt with aussie heads, mild cam etc. I was thinking of purchasing a blue thunder intake. How well would that intake work on aussie heads? Would there be a problem with matching the ports? Also, would this manifold allow enough clearance for the stock engine screen to be used?
Original Post
DJ Daniel Jones (Guest)
The Blue Thunder intake is for 4V ports which are much larger than 2V ports. It will be a poor match. The intake of choice for Aussie 2V heads is a Weiand Xcelerator 2V which is a single plane. It has somewhat larger ports than the 2V heads so will require soe port matching. If you must have a dual plane high rise for the 2V heads, there is one made in Australia:

http://www.users.pipeline.com.au/tpm/f-dual.htm

With current exchange rates cost is over $550 to the States.

Dan Jones
Views: 56
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×