Skip to main content

I have a 72 without the clutch effort reduction linkage. I found, on the drivers side floor, a pivot pin with only 1 of the retaining clips connected. I looked up under the dash to see where I am missing a pin, but I do not see anything missing. There is one in the clevis going to the clutch master cylinder, and one on the brake pedal connected to the brake master cylinder. I have driven the car, and everthing seems to work. (clutch and brakes) It's hard to see up in there. What am I missing?
Original Post

Replies sorted oldest to newest

Post
×
×
×
×
Link copied to your clipboard.
×