clutch master

Guest

ok, whiz kids,
can anyone provide:
1. bore and stroke of stock master cylinder?
2. bore and stroke of stock slave cylinder?
3. bore and stroke of long throw slave cylinder?

I'm looking at a new project and need the numbers,
thanks guys.
Glenn

5/19/086:47 AM

❤️ 0

Original Post

Replies sorted oldest to newest

parapanteraIf you can't fix it with a hammer.....you have an electrical problem.

Courtesy of SO Bill's database:
1.An OEM Pantera Clutch Master Cylinder bore measured 0.7465 inches (18.96 mm) and had a max stroke 1.25 inches (31.74 mm)
2. An OEM Pantera Clutch Slave Cylinder bore measured 1.000 inches (25.4 mm) and had a max stroke 1.625 inches (41.27 mm)

I know I have #3 written down somewhere!

5/19/0811:46 AM

❤️ 0

edmguru (Guest)

Thanks, Ron, I'm sure you could probably pulled those out of memory after the work you did on yours.
thanks again,
Glenn
www.panteraguy.com

5/19/081:29 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...