Skip to main content

2 replies

Cobra Jet cam

A albanygt40Member
Hi All

I'm stripping the engine out my 72 Pantera.
My motor is a matching number block still has 4V heads and 4 bolt main block.
Is there a way to identify the the cam fitted? I'm hoping the stock Cobra Jet cam is still there. The only marking on the rear of the cam is what looks like a number 1 stamped in it.
Original Post

Replies sorted oldest to newest

V 4vandproudMember
if the original cam is still there it's probably toast upon inspection

the number 1 is not promising, have a look here, apparently some ID marks are between the lobes and this will giva an idea what some factory cam markings look like. unfortunately the 72 CJ is not listed though

http://mustangtek.com/Camshaft/camshaft.html

there are reproductions available but seriously think about modernizing the lobe tech

Add Reply

Views: 187
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×