I'm reposting this here as it may have got lost in the previous discussion...I'm just trying to gauge if there is much interest in a 'reproduction' De Tomaso dealer sign (as per the photo of an original below).
The originals list and sell on Ebay for $300 + shipping from Germany and I thought there may be interest in a reproduction for your garage wall at significantly lower cost.
After some searching I have a sign maker here in the US lined up to make these 'reproduction' signs that will be as close to original as possible, 18"x24" made of 18 GA steel and soft embossed (stamped/raised) 'T'. There is a minimum order to make this viable, so I'm putting out some feelers to see how many people might be interested in purchasing a 'reproduction' sign?
I don't have a final cost at the moment but currently expect about $75 + shipping. On the shipping bear in mind 18 GA steel at 18"x24" is pretty heavy at around 6.2lbs, although if I can get this going I may be able to have them ready and bring to anyone attending the POCA Vegas event in April.
So how many are interested?
Julian
Original Post
