quote:Originally posted by Kjeld Pedersen:
some "small" brake for the project.
kjeld
Looks good. Wonder when they produce a full 180 degrees ;-)
quote:Originally posted by No Quarter:
Looks good. Wonder when they produce a full 180 degrees ;-)
mabye this one is easere to see.
i think around 110 degrees.
Kjeld.
Attachments
The brakes are on in one side.
just for testing.
standard size in front.
kjeld
just for testing.
standard size in front.
kjeld
Attachments
The brakes are on in one side.
just for testing.
new size in front. 400mm x 34mm 8piston
kjeld
just for testing.
new size in front. 400mm x 34mm 8piston
kjeld
Attachments
The brakes are on in one side.
just for testing.
new size in rear. 360mm x 34mm 4pisten
Electric handbrake.
kjeld
just for testing.
new size in rear. 360mm x 34mm 4pisten
Electric handbrake.
kjeld
Attachments
quote:Originally posted by Kjeld Pedersen:
The brakes are on in one side.
just for testing.
new size in rear. 360mm x 34mm 4pisten
Electric handbrake.
kjeld
Attachments
[QUOTE]Originally posted by Kjeld Pedersen:
The brakes are on in one side.
just for testing.
new size in rear. 360mm x 34mm 4pisten
Electric handbrake.
kjeld
The brakes are on in one side.
just for testing.
new size in rear. 360mm x 34mm 4pisten
Electric handbrake.
kjeld
Attachments
Regarding the position of the caliber in rear.
Can someone tell me if it will it make any change or not. If the caliber is in front of the rear axel or behind, i can change the position of the caliber and the Electric handbrake.
kjeld
Can someone tell me if it will it make any change or not. If the caliber is in front of the rear axel or behind, i can change the position of the caliber and the Electric handbrake.
kjeld
As long as the bleed ports are on the top it shouldn't matter.
Are all the pistons in the caliper same size?
-Sami
-Sami
This set have bleed ports in top and buttom, so it is possible to turn them.
quote:Originally posted by Husker:
As long as the bleed ports are on the top it shouldn't matter.
Hi Sami.
The front.8 piston. 4x25,4mm and 4x34,6mm. there are 4 brake pads for each caliber.
The back. 4 piston. 2x38mm and 2x41mm.
this one only 2 brake pads each caliber.
kjeld
The front.8 piston. 4x25,4mm and 4x34,6mm. there are 4 brake pads for each caliber.
The back. 4 piston. 2x38mm and 2x41mm.
this one only 2 brake pads each caliber.
kjeld
quote:Originally posted by TransSami:
Are all the pistons in the caliper same size?
-Sami
If there are bleed screws at both ends then it shouldnt matter. But since there are different piston sizes ther should be right and left caliper, don't mix the sides. But I guess you already knew that
-Sami
-Sami
Looks like good progress on the chassis too. Well done - almost ready!! :-)
only missing the outer sheet metal.
quote:Originally posted by Push1267:
Looks like good progress on the chassis too. Well done - almost ready!! :-)
Coyote engine almost there.
Have to find another oilpan so i can get it longer back and more Down.
Kjeld
Have to find another oilpan so i can get it longer back and more Down.
Kjeld
Attachments
another one
Attachments
one more
Attachments
quote:Originally posted by Kjeld Pedersen:
one more
Attachments
Add Reply
Sign In To Reply