Skip to main content

Closed4 replies

Does the Clevor engine fit

carlsbadcarguycarlsbadcarguyMember
Has anybody dealt with a clevor engine ( windsor
block and Cleveland heads. I have been offered a
good price on a 408 Clevor long block, but am curious if all my Cleveland parts ( headers, brackets for the alt and air ) will still fit this motor. Has anybody out there been faced with or applied this engine to their pantera?
Thanks
Original Post

Replies sorted oldest to newest

joulesjoules"Racing is Life, anything before or after is just waiting" - Steve McQueen
The 9.5" Windsor deck height vs. the Cleveland 9.2" will push the headers up and out slightly, but it may just be a case of some 'clearancing' with a hammer. That is assuming the 408 has iron Cleveland heads and not Al with raised ports.

You will be faced with re-routing water hoses etc. as per any Windsor installation.
D djezcMember
I have a 9.5 deck height Dart Iron Eagle (Windsor style) block with CHI 218cc aluminum heads. Everything fits. The only adjustments were a set of 1/4 inch spacers between the headers and the block. I had a the exhaust system custom fit once the engine was in and the headers were bolted up. Any competent exhaust shop should be able to handle this task. In my opinion a Clevor is absolutely the way to go.
Views: 175
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×