What is the correct order for installing the various parts of the Mangusta's interior Door Handle?

here is the parts manual, start with the cone, then spring, then flat, lastly handle. The door handles were shared with Maserati Ghibli, a little clearer picture is at

https://www.eurospares.co.uk/p...lighting/doors-28480

 I don't guess those are the right screws? Lee

Exactly as Lee described, looks like you might be missing one spring and one flat(ish) piece

8ma1248 posted:

Hello guys,
can anybody tell me the right sequence how to install the interior door handle and all his parts (handle, washer, spring, rosette, …) at the door panel? 

Someone told me, the spring would be mounted behind the door panel ??!!

Thanks a lot for your support.

Do not use those screws, they are for sheet metal and will ruin the receiver.

DICK RUZZIN

mkeh posted:

Exactly as Lee described, looks like you might be missing one spring and one flat(ish) piece

Hello guys,

perfect, in this picture it's clearly how to install the handle.

And Yes, the screw should be a metric countersunk head screw. 

Thanks a lot for accurate watching and your advices. 

Hello,
additional I guess, that the spring is not original or the right one,
because the conic spring does not really fit well.
Does anyone have a picture from a fitting spring and a hint where to get.

Thanks for helping.

In place

MH

fyi, source for the springs. Correct escutcheons I cannot find...Lee

https://www.alfastop.co.uk/cgi...gi?prod_code=1CWB186

Maserati source had some a while back but ask was too much for me. May have some made (on my to do list)

Thanks Guys, didn't knew I was missing those springs until now. Great to have a source

Nate, not just you ! Everytime I think I've seen everything, there is another thing... Neither did I have #31 but expect these can be used;

https://www.alfastop.co.uk/cgi...&newDispCount=10

Not the perfect escutcheon for those missing theirs, but I'm hoping piece #31 is a match--Lee