As above - the inner lip where the oil seal sits has a small crack. Just weighing up options of either to replace, or repair. It only holds the seal, but with the crack the seal floats a fraction.
Original Post
Replies sorted oldest to newest
...no idea. The stub axle is shared with Fiat 125/1300/1500/124...Maybe a place to start ?
You might try : ipsco.org
P/N IPS093
deniscCaretaker of 8MA1244 '70 Euro Mangusta DRIVE THEM, THEY WERE MEANT TO BE DRIVEN, IF YOU WANT TO LOOK AT ONE, BUY A POSTER!
Not a heavy stress area, grind, weld and machine would be easiest and least expensive option.
@ehpantera posted:You might try : ipsco.org
P/N IPS093
Very different I’m afraid - here’s a Mangusta one for reference:
Attachments
Images (1)
