Front License Plate Mount

khansmithMember

Moved back to New Jersey and I need to mount my front license plate. I have a bracket that mounted to two studs under the bumper (74 Pantera). I can't for the life of me figure out the bolt size (tried both #10 course and fine thread). Anyone know the bolt size for these studs?

Thanks,
Khan

8/7/114:59 AM

❤️ 0

Original Post

Replies sorted oldest to newest

rmccallMember

They should be M6X1.00.

Ron

8/7/117:30 AM

❤️ 0

firstpanteraMember

Khan, in the state of New Jersey, if you have QQ plates you do not need to mount your front plate. Don't know if thats your situation or not. Where about in Jersey are you located?

8/7/119:26 AM

❤️ 0

khansmithMember

quote:
Originally posted by r mccall:
They should be M6X1.00.

Ron

Thanks Ron!

8/8/115:30 AM

❤️ 0

khansmithMember

quote:
Originally posted by firstpantera:
Khan, in the state of New Jersey, if you have QQ plates you do not need to mount your front plate. Don't know if thats your situation or not. Where about in Jersey are you located?

Didn't go QQ route this time (long story) but will do so in a year or so. I am in Ridgewood NJ..

8/8/115:31 AM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...