Fuse block

Don't know about glass fuses, there are a couple kits out there that use the plastic "blade" type fuses including the one I used which is Bob Timma's (very happy with it)and one vendor that converts a stock pantera fuse block into one that uses the plastic fuses. Check out Chuck Melton's website, I think he did a comparison

Thanks for your reply. I am new to the Pantera world as well as this site. Since posting this question I have found previous post about the same subject.

Joe, you are welcome and welcome to the Pantera community! There are many, many topics covered in this forum so it doesn't hurt to do a search first. That way the question you had may already be answered and you don't have to wait for an answer. There are other valuable websites with lots of free info about the cars. Check out Mike Dailey's The Pantera Place located at http://www.panteraplace.com/
or Chuck Melton's website located at http://www.geocities.com/provamo72/

I would also strongly urge you to join both the Pantera International (PI) and Pantera Owner's Club of America (POCA). They have regional chapters and you will find that the people in the group have a vast wealth of knowledge and experience with these cars and people have been known to drive several hours to help another Pantera owner with a project or check out a car prior to purchase.

What area of the country are you in?

Gary #06984

Thanks for the welcome. I just finished changing the fuse tabs in my block to the clips that hold AGC type glass fuses. Has to be better than the original setup.
I live 20 miles outside of Nashville TN.