HALF SHAFTS REMOVAL

Guest

SIMPLE PANTERA REQUEST FOR INFORMATION. CAN BOTH HALF SHAFTS BE REMOVED FROM A PANTERA WITH OUT DISTURBING ZF OR SUSPENSION? I AM PLANING TO TRANS PORT '74 PANTERA ON A 2 WHEEL U-HAUL DOLLY. FRONT WHEELS ON DOLLY, REAR WHEELS FREEWHEELING. I DO NOT WANT THE ZF TURNING DURING THE TRIP. COMMENTS? JD#1701

9/28/078:11 AM

❤️ 0

Original Post

Replies sorted oldest to newest

richardtMember

Yes they can, but you only need to remove the bolts on the hub side and slide the half shafts inward. You may want to wire them up to the body to keep them in place.
Richard T.

9/28/078:17 AM

❤️ 0

JD (Guest)

2nd part of the inquiry is of concern also. Has anyone ever used a 2 wheel U-HAUL dolly for transporting a PANTERA? Would a 1500 mile trip be too much stress on the wheel stub shafts and bearings? JD#1701

9/28/0711:20 AM

❤️ 0

markmBuy now, pay later!

quote:
Originally posted by JD #1701:
Would a 1500 mile trip be too much stress on the wheel stub shafts and bearings? JD#1701

Not if they are in reasonably good shape. Jack up each back wheel and check for excessive play in the bearings. I would expect minor play out of original bearings.

9/28/072:21 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...