Hall Wheel

You are going to have to go to Hall Pantera for that wheel. He's the one that had them made. I doubt there are more then a couple of sets he sold.

You reduce the size of your picture in Windows Photo editor. If you are running any Windows version you have it.

Open it, right click on the picture, a menu opens, click edit, another menue, click on resize.

Your picture will be show as 100 for both the height and width. Change those numbers to 33 save and exit.

That will reduce the picture to 33% of what you have. Should be small enough to post here then.

thanks
I have a message into Hall to see if they have any, but did not see any on the web page.
I'll try the reduction right click. Tried to PDF but that did not get it done.

They are closed on Mondays. All of them are as a matter of fact.

If i need new wheels, any recommendations based on strength so this does not happen in the future (looks have a lot to do also. I am looking at the new style GP-4s

Those would be for a wide body car. A lot of people are going to the campi clones for the stock body.

Ultimately there could be the same issue down the road on the wheels since they are both custom built to order.

If in 5 years you bend a wheel, where are you going to get another one.

Are they like theses here? http://www.poca.com/index.php/...g2_imageViewsIndex=1

I always thought the same too if something happened to mine. Any way you can repair yours at a wheel shop?