Help,
I am installing the Hall Super Stopper brake kit and need to know the torque value for the original brake caliper bolts.
Also when installing the brake lines should I use teflon tape, thread sealant, or nothing at all?
Original Post
Replies sorted oldest to newest
Hi Madguy,
I'm in the start of the same project,I'll lock it up and get back to you.BTW how much time do you have in the job?
Thanks Guy
I'm in the start of the same project,I'll lock it up and get back to you.BTW how much time do you have in the job?
Thanks Guy
quote:
Originally posted by guywwagner:
Hi Madguy,
I'm in the start of the same project,I'll lock it up and get back to you.BTW how much time do you have in the job?
Thanks Guy
I haven't even started it yet. I am still at work anxiously awaiting quitting time to get home and start. I must say that I was very impressed with the quality of the kit except for the instructions.
quote:
YOU SHOULD DO YOURSELF A SERVICE AND PURCHASE THE TECHNICAL MANUAL! IT'S MARVELOUS READING!
[This message has been edited by MARLIN JACK (edited 08-14-2002).][/B]
I have been meaning to get that service manual and the TSBs. I just haven't gotten around to it yet.
[This message has been edited by madguy (edited 08-14-2002).]
quote:
Originally posted by guywwagner:
Hi Madguy,
I'm in the start of the same project,I'll lock it up and get back to you.BTW how much time do you have in the job?
Thanks Guy
okay, the front rotors are supposed to be marked left or right. They are not. Which way are the vanes suppose to face.
If you are looking at the rotor straight up the vanes can either go this way(front /) or this way (front \).