How Many Amps Draw and CFM's from stock 74 condensor?

Guest

I'm looking to change out my rear a/c condensor to a larger "serpentine" type condensor that has more rows per sq inch and put a super pusher/puller reversible fan or fans. (Highway vs traffic) I wanted to know how many amps the stock unit draws so I dont pick a new one that doesn't exceed that amount by very much. Also need to know the CFM's it pulls. Also any idea's on the max size 20"x12"???? and any mounting ideas for the shroud and condensor??
Thanks guys!
Emery

10/27/0510:39 AM

❤️ 0

Original Post

lastpushbutton (Guest)

Emery, You know my setup already. I can't tell you about stock amp draw. I can tell you that my dual fans run on a 10 gauge wire directly from the batt, fused, switched, and then to the twin motors. When I activate the switch, it turns on the fans and feeds the thermostat that controls the compressor clutch. Whan all is running it all but pegs my ammeter. I run a 30 amp fuse near the batt. It has worked well for 2 seasons. Sounds like you are headed in the right direction..stay cool..Bill

10/31/0511:32 AM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...